General Terms and Conditions of Sale (February 2026)
1. AGREEMENT, ACCEPTANCE AND APPROVAL. This is an offer (“Offer”) by Haimer USA, LLC (“Haimer”) to sell to Purchaser the goods identified on the face hereof or in documents incorporating this Offer by reference (the “Goods”). Acceptance by Purchaser of this Offer, which, upon acceptance, constitutes the contract for Haimer to sell and Purchaser to buy the Goods, is expressly and exclusively limited to these terms, conditions and limitations. Purchaser can reject this Offer by not ordering Goods, and Purchaser will accept this Offer by ordering or receiving Goods. This Offer does not constitute an acceptance by Haimer of any offer or counteroffer of Purchaser and serves as a written rejection of any additional, different, or inconsistent terms, conditions or limitations contained in or incorporated by reference in any forms, purchase orders or other documents of Purchaser that already have been or hereafter shall be presented to Haimer with respect to this Offer. If, notwithstanding the foregoing, this Offer is deemed by a court, arbitrator or other third party with binding legal authority over the enforcement of this Offer to be an acceptance of an offer or counteroffer by Purchaser, that acceptance is expressly made conditional on Purchaser’s assent to the terms, conditions and limitations set forth in this Offer and waiver of the terms, conditions and limitations set forth by the offer or counteroffer of Purchaser. In any case, upon acceptance by Purchaser, this Offer constitutes the entire agreement between Haimer and Purchaser with respect to the matters specified in this Offer and supersedes all of their prior and contemporaneous agreements and understandings, negotiations, inducements, representations or conditions, whether oral or written, whether express or implied, with respect to such matters. The terms, conditions, and limitations set forth in this Offer can be modified, altered, or added to only by a subsequent written instrument signed by an authorized representative of Haimer. Failure by Haimer to enforce any of the terms, conditions and limitations of this Offer shall not constitute a waiver of those terms, conditions and limitations or a waiver of any other terms, conditions or limitations in this Offer, and the failure of Haimer to exercise any right arising from default of Purchaser or otherwise shall not constitute a waiver of that right or any other rights. No inconsistent course of dealing or course of performance between Haimer and Purchaser, or usage of trade or industry custom, if any, prior to, contemporaneous with or subsequent to the making of this Offer shall waive, vary, serve to explain or serve to interpret any of the terms, conditions and limitations of this Offer.
2. PRICING. Unless otherwise stated on the face of this Offer, all pricing is in US Dollars ($), F.O.B. Haimer’s premises, excluding all costs of packaging, postage, insurance and shipping. All stated prices are exclusive of any federal, state, or local taxes, fees, duties, charges, and levies, however, designated or imposed, including but not limited to value-added and withholding taxes. Any such taxes, fees, duties, charges, and levies are the responsibility of Purchaser. All offered prices are subject to change.
Material Cost Adjustment. Notwithstanding the foregoing, if, after the date of this Offer, the procurement costs incurred by Haimer for materials required for production (including, without limitation, carbide, steel, and alloys) change by more than 5% compared to the costs at the time of the Offer, Haimer shall be entitled and obliged to adjust the agreed price. Such adjustment shall be made at Haimer’s reasonable discretion based on the weighted proportions of these cost factors in the total price. This adjustment shall apply to both cost increases and cost reductions. Haimer shall inform Purchaser of such price adjustment no later than upon invoicing.
3. PAYMENT. Unless otherwise agreed in a writing signed by Haimer, payment in US currency is due thirty (30) days from the date of receipt of an invoice from Haimer and Haimer may assess a 1.5% per month late charge or the maximum late charge permitted by applicable law, if less, on past due payments, plus Haimer’s reasonable costs of collection, including court costs and reasonable attorney’s fees. In the event of anticipatory breach of this Offer by Purchaser, if Purchaser fails to make timely payment, or if Haimer has any reasonable doubts at any time regarding Purchaser’s ability to pay its costs and expenses as they accrue, Haimer may (i) require full or partial payment in advance, or (ii) cancel any further deliveries on any orders, except upon receipt of cash or satisfactory security. If pursuant to this provision, Haimer shall defer any shipments or cancel in whole or in part the delivery under this Offer, Purchaser shall be liable for and reimburse Haimer for all losses, expenses, and damages, including any and all direct and consequential damages, incurred by Haimer as a result of the deferral or cancellation. Haimer reserves all other rights granted to a seller under applicable law for Purchaser’s failure to pay any amounts when due. Purchaser may not withhold payment of any amounts due and payable as a set-off of any claim or dispute with Haimer, regardless of whether relating to Haimer’s breach, bankruptcy, or otherwise.
4. DELIVERY DATE. All scheduled delivery dates are estimates based on a normal workload and all deliveries are subject to change without liability to Haimer. Unless expressly specified to the contrary, all shipping dates are based upon current availability of materials, present production schedules and prompt receipt of all necessary information.
5. SHIPMENT AND DELIVERY. Unless otherwise agreed by the parties in writing, all Goods will be shipped by Haimer at the Purchaser’s cost. Haimer may, in its sole discretion, without liability or penalty make partial shipments. All Goods will be shipped F.O.B. Haimer's premises, freight collect and may be so shipped in several lots. Haimer will select the carrier but shall not be deemed thereby to assume any liability in connection with the shipment nor shall the carrier be construed to be the agent of Haimer. Purchaser must provide its own insurance. Title and risk of loss or damage to all Goods sold hereunder shall pass from Haimer to Purchaser upon delivery by Haimer to the possession of the carrier, provided that Haimer reserves a purchase money security interest in the Goods, and lien upon the Goods as security for the faithful performance by Purchaser of all the terms, covenants, and conditions of this contract to be kept and performed by Purchaser. Any claims for loss, damage, or mis-delivery thereafter shall be filed by Purchaser with the carrier. If the parties agree that Purchaser will arrange for shipping, then Haimer will notify the Purchaser when the Goods are ready for shipment and Purchaser must arrange for such Goods to be shipped within five (5) days of such notice. If Purchaser does not arrange for shipment within five (5) days of receiving notice from Haimer, Haimer may, in its sole discretion, (i) ship the Goods to Purchaser at Purchaser’s cost; or (ii) warehouse at a suitable location Purchaser’s Goods at a cost to Purchaser of $250 in, $250 out, and $300 per day.
6. FORCE MAJEURE. Haimer shall not be liable for delays or defaults of delivery caused by acts of God or public enemies, public health emergency, local, state or federal government regulations, orders or directives, civil war, delay of carriers, terrorism, insurrection or riot, fire, flood, explosion, earthquake or serious accident, strike, labor trouble or work interruption or any cause beyond Haimer’s reasonable control. In the event that circumstances beyond Haimer’s reasonable control cause a delay in or prevent the performance of this contract until a date beyond that contemplated for performance, and if Haimer thereby incurs expenses, loss, or damage, there shall be a reasonable increase in the contract price to cover such added expense, loss, or damage. Haimer may, during any period of shortage due to any of the above contingencies, allocate its available supply of Goods and/or products among itself and its customers in such manner as Haimer in its sole judgment, deems fair and equitable.
7. CANCELLATION OR MODIFICATION. Cancellation or modifications of all or part of any purchase order are subject to Haimer’s prior written consent. If Haimer consents to cancellation or modification, Purchaser agrees to pay to Haimer all expenses incurred and damage sustained by Haimer on account of the cancellation or modification.
8. CHANGES IN PRODUCT DESIGN OR MANUFACTURE. Haimer shall have the right to change, discontinue or modify the design and construction of any of its products and/or Goods and to substitute material equal to or superior to that originally specified.
9. CLAIMS. Notice of claims against Haimer hereunder for any reason, including breach of warranty, must be made to Haimer in writing at the earlier of: (i) within thirty (30) days after shipping; or (ii) within ten (10) days of delivery to afford Haimer an opportunity to make a prompt investigation of surrounding facts and mitigate any damages which might ensue, should it be determined to be Haimer’s responsibility. Failure to give such notice to Haimer shall constitute a waiver by Purchaser of any right later to assert such a claim, and such failure shall constitute an irrevocable acceptance of the Goods and an admission that they fully comply with all of the terms and conditions of the order.
10. RETURNS. Distributors and customers that wish to return standard stock items are required to call Haimer for return authorization prior to sending the item(s) back. Items returned without prior authorization will not be accepted. When calling for return authorization, the original invoice number must be given, along with a replacement purchase order of equal or greater value. Previously invoiced orders will not be considered replacements. Return numbers given will be valid for a period of 60 days, and will be void if tools are not returned within that time period. All returns must adhere to the following conditions:
a) All returned items must be new in the original packaging, and in resalable condition. All items are subject to inspection upon receipt before credit will be considered.
b) A replacement purchase order of equal or greater value must be placed at the time the RGA number is given. Previously invoiced orders will not be considered replacements.
c) Items for return must be authorized by a Haimer representative within 90 days of the original invoice date. If a return is received before the 90 day period, a restocking fee of 15% will be applied. Orders that are older than 90 days will be charged a 25% restock fee. Orders that are older than 4 months will be charged a 35% restock fee. Haimer USA reserves the right to deny any returns for orders older than 6 month. All returns will be subject to approval by Haimer USA.
d) The RGA number must be specified with the return, along with a copy of the original packing slip and/or invoice.
WARRANTY. Haimer warrants that the Goods sold pursuant to these General Terms and Conditions of Sale will be free from defects in material and workmanship at the time shipped and for one (1) year thereafter in accordance with these General Terms and Conditions of Sale. The foregoing limited warranty does not apply to (i) any defect in Goods not manufactured by Haimer (ii) improper installation or maintenance of the Goods, (iii) any Goods manufactured according to Purchaser’s specifications and (iv) normal wear and tear, negligent or improper use, handling and/or storage of the Goods. EXCEPT FOR THE EXPRESS WARRANTIES CONTAINED HEREIN, THE GOODS ARE PROVIDED “AS IS”, AND TO THE FULLEST EXTENT PERMITTED BY LAW, HAIMER EXCLUDES ALL OTHER EXPRESS AND IMPLIED TERMS, CONDITIONS, WARRANTIES OR REPRESENTATIONS REGARDING THE GOODS ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY IMPLIED TERMS OF MERCHANTABILITY, SATISFACTORY QUALITY, REASONABLE SKILL AND CARE AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES SET FORTH IN THIS SECTION 11 AND SECTION 12 ARE PURCHASER’S SOLE AND EXCLUSIVE REMEDIES WHETHER IN TORT, OR OTHERWISE, ARISING FROM DEFECTS IN GOODS. HAIMER WILL NOT BE LIABLE FOR INJURIES OR DAMAGES TO PERSONS OR PROPERTY RESULTING FROM ANY CAUSE WHATSOEVER. Haimer’s sole obligation and Purchaser’s exclusive remedy under this warranty shall be limited to one of the following, as selected by Haimer: (a) repair or replacement of the Goods determined to be defective by Haimer or (b) a refund for the appropriate amounts that Purchaser paid for such Goods.
11. LIMITATIONS ON LIABILITY. IN NO EVENT WILL HAIMER BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, REPUTATIONAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF USE, PROFIT OR UNDER-UTILIZATION OF LABOR OR FACILITIES, LOSS OF REVENUE OR ANTICIPATED PROFITS, LOST DATA, AND COSTS OF PROCUREMENT OF SUBSTITUTE GOODS, LINE STOPPAGE, AND PRODUCT RECALL REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT, OR OTHERWISE, EVEN IF HAIMER HAS BEEN ADVISED OF THE POSSIBILITY OF THE DAMAGES. HAIMER’S TOTAL LIABILITY FOR ALL CLAIMS ARISING OUT OF, OR RELATING TO, THE GOODS WILL BE LIMITED TO GENERAL MONEY DAMAGES IN AN AMOUNT NOT TO EXCEED THE TOTAL PURCHASE PRICE FOR THE GOODS GIVING RISE TO THE CLAIM.
12. INTELLECTUAL PROPERTY. Haimer retains ownership of any patent, know-how, trade secret, trademark, service mark, copyright, or other intellectual property right that is related to the Goods or is otherwise developed by or provided to Purchaser in connection with the supply of the Goods.
13. WORK PRODUCT. “Work Product” shall include, without limitation, all designs, discoveries, creations, works, devices, masks, models, work in progress, service deliverables, inventions, products, special tooling, computer programs, procedures, improvements, developments, drawings, notes, documents, business processes, information and materials made, conceived or developed by Haimer alone or with others that result from or relate to the Goods. All Work Product shall at all times be and remain the sole and exclusive property of Haimer. Purchaser hereby agrees to irrevocably assign and transfer to Haimer and does hereby assign and transfer to Haimer all of its worldwide right, title and interest in and to the Work Product including all associated intellectual property rights. Purchaser hereby waives any and all moral and other rights in any Work Product or any other intellectual property created, developed or acquired in respect of the Goods. Haimer will have the sole right to determine the treatment of any Work Product, including the right to keep it as trade secret, execute and file patent applications on it, to use and disclose it without prior patent application, to file registrations for copyright or trademark in its own name or to follow any other party.
14. INDEMNIFICATION. Purchaser hereby agrees to indemnify, defend and hold harmless Haimer from and against any and all damages, liabilities, losses, costs, expenses and fees (including reasonable attorneys’ fees, professional fees and court costs), including, but not limited to, all losses related to property damage, loss of profits or revenues, loss of use of any property, cost of capital, cost of purchased or replacement Goods or temporary equipment, personal or bodily injury, or death for any suits, claims, counterclaims, demands, judgments and other actions (each, a “Claim”), regardless of whether a Claim is based on theories of contract, tort, negligence, strict liability, warranty, indemnity, contribution, statute, or otherwise, including without limitation, all Claims relating to injury to and/or death of any and all persons and for loss of and/or damage to property arising from or in connection with (i) Purchaser’s efforts to promote, market, sell and distribute the Goods, including, without limitation, any negligent, reckless or wanton acts or omissions of its employees, representatives and agents arising in connection with or pursuant to those sales efforts, (ii) the use, handling, repair, alteration, adjustment, operation or modification of the Goods by any of Purchaser’s employees, representatives or agents, and (iii) any claims of patent, trademark or other intellectual property infringement for Goods manufactured in accordance with Purchaser’s specifications. Purchaser’s obligation to indemnify, defend and hold harmless Haimer extends to instances where Haimer is alleged or found to be negligent. For any Claim with respect to which it has an indemnification right under this Section 15, Haimer shall have the option to defend such Claim with counsel of Haimer’s own selection at the sole cost and expense of Purchaser. If Haimer, at its option, chooses to defend a Claim, Purchaser agrees to cooperate with and assist Haimer in its defense in whatever reasonable ways Haimer chooses.
15. CONFIDENTIALITY. (i) Purchaser may acquire knowledge of Haimer Confidential Information (as defined below) in connection with Goods and/or its performance hereunder and agrees to keep Haimer Confidential Information in confidence during and following termination or expiration of this contract. “Haimer Confidential Information” includes but is not limited to all information, whether written or oral, in any form, including, without limitation, information relating to the research, development, products, methods of manufacture, trade secrets, business plans, customers, vendors, finances, personnel data, Work Product, and other material or information considered proprietary by Haimer relating to the current or anticipated business or affairs of Haimer that is disclosed directly or indirectly to Purchaser. In addition, Haimer Confidential Information means any third party’s proprietary or confidential information disclosed to Purchaser in the course of providing Goods to Purchaser. (ii) Purchaser agrees not to copy, alter or directly or indirectly disclose any Haimer Confidential Information. Additionally, Purchaser agrees to limit its internal distribution of Haimer Confidential Information to Purchaser’s employees who have a need to know, and to take steps to ensure that the dissemination is so limited. In no event will Purchaser use less than the degree of care and means that it uses to protect its own information of like kind, but in any event not less than reasonable care to prevent the unauthorized use of Haimer Confidential Information. Purchaser may disclose Haimer Confidential Information that is required to be disclosed pursuant to a requirement of a government agency or law but only after Purchaser provides prompt notice to Haimer of such requirement and gives Haimer the opportunity to challenge or limit the scope of the disclosure. (iii) Purchaser further agrees not to use Haimer Confidential Information except in the course of performing hereunder. Purchaser shall return, transfer or assign to Haimer all Haimer Confidential Information, including all Work Product, and all copies containing Haimer Confidential Information.
16. COMPLIANCE WITH LAWS. Purchaser shall comply with all laws and regulations applicable to Goods, including but not limited to all applicable import and export laws and regulations. Purchaser shall provide all information requested by Haimer relating to Haimer’s voluntary or mandatory compliance with any law or regulation, and Purchaser shall indemnify Haimer for any losses incurred by Haimer arising from Purchaser’s failure to provide the information requested by Haimer. Goods will not be shipped for delivery outside of North America a/o Central America.
17. AFFAIRS WITH THE RUSSIAN FEDERATION. The customer (Buyer) shall not sell, supply, transfer, export or re-export, directly or indirectly, to the Russian Federation or for use in the Russian Federation any goods supplied that fall under the scope of Article 12g of Council Regulation (EU) No 833/2014. The customer (Buyer) shall undertake its best efforts to ensure that the purpose of nr. 1 is not frustrated by any third parties further down the commercial chain, including by possible resellers. The customer (Buyer) shall set up and maintain an adequate monitoring mechanism to detect conduct by any third parties further down the commercial chain, including by possible resellers, that would frustrate the purpose of nr. 1. Any violation of nr. 1, 2 or 3 shall be entitled to seek appropriate remedies, including, but not limited to the rescission of the contract. The customer (Buyer) shall immediately inform us about any problems in applying nr. 1, 2 or 3, including any relevant activities by third parties that could frustrate the purpose of nr. 1. The customer (Buyer) shall make available to us information concerning compliance with the obligations under nr. 1, 2 and 3 within two weeks of the simple request of such information.
18. LAW; VENUE; PERSONAL SERVICE. All matters arising out of or relating to this agreement are governed by and construed in accordance with the internal laws of the State of Illinois without giving effect to any choice or conflict of law provision or rule (whether of the State of Illinois or any other jurisdiction) that would cause the application of the laws of any jurisdiction other than those of the State of Illinois. Any legal suit, action or proceeding arising out of or relating to these General Terms and Conditions of Sale shall be instituted in the federal courts located in the Northern District of Illinois or state courts located in the 18th Judicial Circuit Court, DuPage County, Illinois. Each party irrevocably submits to the exclusive jurisdiction and venue of such courts in any suit, action or proceeding. The exclusive choice of forum set forth in this section shall not be deemed to preclude the enforcement by Haimer of any judgment obtained in any other forum or the taking by Haimer of any action to enforce the same in any other appropriate jurisdiction, and Purchaser hereby waives the right, if any, to collaterally attack any such judgment or action.
19. SEVERABILITY. If individual provisions of these General Terms and Conditions of Sale become void in whole or in part, the remaining provisions shall remain in full force and effect. The parties agree that such void provision will be deemed amended to achieve as nearly as possible the same economic effect as the original terms.
20. WAIVERS; AMENDMENTS. Waiver by Haimer of any breach of these General Terms and Conditions of Sale, or of any contract of which these terms and conditions are a part of, shall not be construed as a waiver of any other such breach. Haimer may amend or modify these terms and conditions upon written notice to Purchaser.
SUSTAINABILITY GUIDELINES. Haimer is committed to sustainability guidelines and expects a similar commitment and application from all business partners. Haimer sustainability guidelines can be accessed via the following link:
Terms of delivery and payment
Version: February 2026